8 color printting and engraving integrated,24 pascal wonderful spray.
Perfect cut,each one is a work of art
Color:As the pictures show
This product is composed of three parts.The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.
Paste Tools: Cloth, Scraper or Credit Card.
1.Will the car body clean, and keep the car body dry.
2.Please make sure to paste position and slowly paste, paste at the same time, please use tools to sticker scraping flat, Until the film have been torn down.
3.Then paste after repeated scraping and pressing, then slowly tear the transparent film.
4.Press the tear film after the sticker, Until flat,Don\'t let the car stickers and have any physical separation or protrusions.
5.In the case of conditions, can moderate heating, to ensure that the sticker can be better and more firmly stuck in the car body.
1.Will be posted on the site clean.
2.Stripped of all at the end or paper,aqueous cleaning agent sprayed on the car body the adhesive area and stickers on the gum surface.
3.Set a good position, the sticker carefully attached to the vehicle body with a plastic scraper scraping,scraping out the water and the air.
4.The natural air dry for 30 minutes,finally remove the transfer film.
Precautions: ①.Be careful when installing the stickers, and be careful not to let the stickers stick together. ②.Never put the car under the hot sun within 48 hours after the installation! ③.Never wash the car within 48 hours after installation! ④.Because some larger stickers are rolled up during the packaging and delivery process,The bottom paper and transfer film of the sticker are a little airy, and some bottom paper will be a little wrinkled, please Don't worry, this is a normal phenomenon and does not affect the quality of the sticker and the installation process.
Return & Warranty
If you're not fully satisfied, please fill in our contact us form and we'll quickly work to correct the problem.